Dry Ice Sectors: Electrical
Cleaning electrical equipment has always been problematical as most cleaning methods involve liquid – which is of course conductive. Electric motors account for up to 80% of all available electric energy used by an industrial site. They also waste up to 50% of electric energy due to inefficient motor optimization.
When dirt, soot, grease and olive oil build up in creation facilities over time, machines can start to get hot and performance improperly, leading to potential failure. So the need to clean electrics is necessary to improve motor efficiency and reduce wastage.
Pressure washing and or steam cleaning can clean electric motors in place and stay effective, however drying moments of windings can be considerable resulting in lengthy shutdown periods. Solvents and chemicals can also clean in place with a much faster blow drying time than pressure/steam cleaning - however care must arrive at limit personnel direct exposure to harmful chemicals and also care must be taken around rubber products, especially rubber based business lead wires. Proper disposal must be implemented otherwise there may be substantial ecological consequences.
Dry ice cleaning provides a moisture free alternate for cleaning electrics. Typically the dry ice pellets used because the blast media sublimate on contact with a surface (they go from the solid state to the vapour state without going through the liquefied state), contracting and training the contaminant from the surface being cleaned. Dry out ice cleaning leaves no residue - so no wash down or blow drying time is needed considerably reducing down time.
When dirt, soot, grease and olive oil build up in creation facilities over time, machines can start to get hot and performance improperly, leading to potential failure. So the need to clean electrics is necessary to improve motor efficiency and reduce wastage.
Pressure washing and or steam cleaning can clean electric motors in place and stay effective, however drying moments of windings can be considerable resulting in lengthy shutdown periods. Solvents and chemicals can also clean in place with a much faster blow drying time than pressure/steam cleaning - however care must arrive at limit personnel direct exposure to harmful chemicals and also care must be taken around rubber products, especially rubber based business lead wires. Proper disposal must be implemented otherwise there may be substantial ecological consequences.
Dry ice cleaning provides a moisture free alternate for cleaning electrics. Typically the dry ice pellets used because the blast media sublimate on contact with a surface (they go from the solid state to the vapour state without going through the liquefied state), contracting and training the contaminant from the surface being cleaned. Dry out ice cleaning leaves no residue - so no wash down or blow drying time is needed considerably reducing down time.
Illustrations of dry ice cleaning on electrical equipment include:
Imagine how much time you might save if you didn't have to treat electrical components differently to the rest of your plant machinery? The advantages of dry ice cleaning will allow you to save endless down time to maximize your assets.
Electric powered motors, Housings, stators, wiring, windings, Circuit breakers and boards, Electric production equipment, Electric control units
Cool down, disassembly, go on to cleaning area, solvent/chemical clean, water wash down, blow drying time, clean up of secondary waste, move to factory location, reassembly ~ are all time throwing away elements of traditional power equipment cleaning – with expensive labour and substance costs. Dry ice cleaning offers on site, successful and cost effective cleaning. Not merely is the process completely dry – no byproduct is created thus minimizing your waste fingertips costs.Key advantages of using dry ice cleaning for electrical equipment
- Superior cleaning results
- Cleans hot and in situ so gets rid of the need for cool-down time, disassembly, water rinse down after chemicals, blow drying time after steam or pressure washing, clean upwards of secondary waste, disassemble – thus drastically minimizing downtime by up to many of these
- Increased operating efficiency of electrical equipment
- Elevated creation
- Extends lifespan of electrical equipment as dry out ice blasting is érosion free thus potential destruction to delicate parts is reduced
- Eliminates chemical direct exposure to personnel
- Moisture free so safe around electrics
- Extremely quick and successful
- Provides environmentally responsible clean
Comments
Post a Comment